Adleer Group

Adleer Group

ADIP-614OA Diezoresistive Silicon Oil Filled Analog Pressure Sensor

Latest News »
ADBC-107C Battery Charger push pipe-sewer camera AD-V2006RC push pipe/sewer drain camera AD-P2005RC VLF ADVLF-30

General information about ADIP-614OA Diezoresistive Silicon Oil Filled Analog Pressure Sensor
ADIP-614OA series are MEMS technology based piezoresistive silicon sensor. It is a kind of high stable and high accuracy OEM preesure measurement sensor. This series are sealed with pressure diaphram of international well-known manufacturers. The external pressure is passed to sensitive elements through 316L stainless steel diaphram and internal silicon oil. Thus it can be used to measure all pressure media compatible with 316L stainless steel.
Each sensor was strictly temperature compensated for both zero and span before shipment to ensure measurement accuracy in complex environment.
There are two options of excitation power — current and voltage.
1-Automation control
2-Pressure instruments
3-Level measurement
4-Pressure transmitters
1-High stability and high accuracy
2-Pressure range:0-40Kpa…7Mpa
3-Wide temperature compensation range
4-Measuring corrosive media ( media compatible with 316L)
5-Standard mounting size
6-Typical output: 0-100mV

  • PDF
  • specifications
There are no photos

Technical specification of the device:

Parameters Min. Typical Max.
40Kpa ±0.20 ±0.30
>40Kpa ±0.10 ±0.20
Hysteresis2 ±0.05 ±0.1
Repeatibility3 ±0.05 ±0.1
Zero -2 ±1 2
Span(FS) 70
Temp. characters
Operation Temp.(℃) -40 125
Compensation Temp(℃) 40Kpa 0 50
100Kpa 0 70
>100Kpa -10 70
Zero Temp.error(%FS)4 ±0.75 ±1.0
Span Temp. error(%FS)4 ±0.75 ±1.0
Thermal hysteresis(%FS)5 0.1
Long term Stability
   Zero (±%FS annual) 0.1
   Span (±%FS annual) 0.1
Supply Current 0.5mA 1.5mA 2mA
Input Resistance 2kΩ 2.5kΩ 3kΩ
Output Resistance 2.5kΩ 3kΩ 3.7kΩ
Load Resistance6 5MΩ
Insulation Resistance(50V)7 50MΩ
There are no video