Adleer Group

Adleer Group

ADOF-112FS fusion splicer

Latest News »
Relay Protection Tester ADRP-1400 Relay Protection Tester ADRP-1200A Primary Current Injection Test ADPA-5000A digital ultrasonic detector  ADUD-501-502-503-504

General information about ADOF-112FS fusion splicer:
1-Small, light, long battery life
2-4 motors accurate core alignment
3-250 times magnification of fiber cores
4-7s fast splicing, 26s intelligent heating
5-More than 4000 times electrodes discharging
6-4400mAh Li-battery, 220 cycles splicing and heating
7-Inductive automatic heater, not heating without fibers
8-3 in 1 multi-function clamps, new waterproof structure
9-Apply to bare fibers, drop cables and jumper wires splicing
function:
1-Small, light, long battery life
2-4 motors accurate core alignment
3-250 times magnification of fiber cores
4-7s fast splicing, 26s intelligent heating
5-More than 4000 times electrodes discharging
6-4400mAh Li-battery, 220 cycles splicing and heating
7-Inductive automatic heater, not heating without fibers
8-3 in 1 multi-function clamps, new waterproof structure
9-Apply to bare fibers, drop cables and jumper wires splicing

  • PDF
  • specifications
There are no photos
false

Technical specification of the device:
Applicable fiber:SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Diameter of cladding:80-150um
Diameter of coating:160-900um
Typical splice loss:SM:0.02dB, MM:0.01dB, DS:0.04dB, NZDS:0.04dB
Return loss:>60db
Fiber cleaved length:10-16mm (coating diameter< 250um ), 16mm(coating diameter: 250-1000um )
Splicing program:40 groups
Operate mode:Manual, Automatic
Auto-heating:Available
Typical splicing time:7seconds
Tube heating time:26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification:250X(X or Y view), 125X(X and Y view)
Viewing method and display:2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result:4000 results
Loss evaluation:Available
Tension test:1.8-2.2N
Interface:GUI menu interface, easier operation
Battery capacity:4400mAh Li-battery, typical 220 cycles(splice and tube heat)
Power supply:Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life:More than 4000 ARC discharges, can be replaced conveniently
Terminals:USB 2.0 port, for uploading splice results and upgrading software
Operating condition:Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: max 15m/s
Dimension:200mm(L)x123mm(W)x95mm(H)
Weight:1.6kg including battery

There are no video