Adleer Group

Adleer Group

ADOR-306DS Coalescing Dehydration and Spparetion Oil Purifier

Latest News »
ADBC-107C Battery Charger push pipe-sewer camera AD-V2006RC push pipe/sewer drain camera AD-P2005RC VLF ADVLF-30

General information about ADOR-306DS Coalescing Dehydration and Spparetion Oil Purifier
ADOR-306DS coalescing dehydration and spparetion oil purifier is made of a hydrophilic coalescing element and a hydrophobic dehydration element which are configured and optimized in a certain proportion. According to the different physical effects of the water in the oil, the free water drops with big diameters when passing the coalescing element. The dehydration element will then separate the water drops, which will be automatically drained out after sinking in the water holder. The oil and water will thus be separated. Combining automatic emulsion splitting, high-efficiency dehydration and precise filtering, the filter can effectively filter out the water and impurities in the oil. The product is suitable for the online automatic operation of various light oil system, turbine oil systems and lubricating systems. It has obvious effects on the online operation of leakage sets.
Features of Product:
1. The whole equipment designed individually with nice appearance,low power and low cost for operation.
2. The plant is all made of stainless steel without adding antirust so that working uninterruptedly.
3. The oil-water interfacial apparatus and automatic drained valve could offer exactly detached water level and drain water automatic when it accumulated condign capacity.
4. Electric system control with PLC (touch screen) which could show working condition and operation of all parts clearly. It also can monitor equipments,automatic control and protect stopping machine. It could use of the equipment operation online without human.
5. Adopting the special oil pump made in Germany that have good airproof,low noise and long life time.
6. Multilayer filtration including coarse filter,protecting filter,nice filer are all imported. The effect of control impurities is excellent.

  • PDF
  • specifications
There are no photos

Technical specification of the device:





ADOR-50 ADOR-100   ADOR-150 ADOR-200
Technical Parameter Flow Rate L/MIN       50 100 150 200
Working Pressure Mpa ≤0.5
Temperature Range °C 45-65
Power Supply 50Hz    380V    3-Phase 4-Wire   (or as requested)
Total Power KW 1.5 3
Inlet/Outlet Diameter mm 32 38 45 50


Length mm 1500 1500 1600 1650
Width mm 1000 1050 1200 1250
Height mm 1400 1400 1500 1600
Weight Kg 450 500 600 700
Oil Treatment Index Water Content ppm ≤100
Kinematic Viscosity mm2/s ≤20% in comparison to the original bias value of new oil
Demulsibility min ≤15
Filtering Accuracy µm ≤5
Cleanness NAS   Grade 5-8
Oil Appearance Transparence
There are no video