Adleer Group

Adleer Group

ADTC-627DS Diezoresistive Silicon Intelligent Circuit Board

Latest News »
ADBC-107C Battery Charger push pipe-sewer camera AD-V2006RC push pipe/sewer drain camera AD-P2005RC VLF ADVLF-30

General information about ADTC-627DS Diezoresistive Silicon Intelligent Circuit Board
ADTC-627DS Diezoresistive Silicon Intelligent Circuit Board replaced the original 4~20mA analog board. With the main body of Microcontrollers CPU, ADTC-627DS is capable to do logical operation and programming. It combines analog and digital circuit in one machine, so is able to output analog signal as well as digital signal. Parameters configuration and compensation of transmitters can be done by buttons on LCD module and internal debugging program. ADTC-627DS provides constant current excitation way for sensors, supporting standard diffused silicon, piezoresistive ceramic, single crystal silicon and level sensors. It is suited for ADTC-627DS housing.
1. Easy adjusting by buttons: on-site span changing by LCD module buttons free from standard pressure source
2. High accuracy: for intelligent board, AD accuracy > 20 bits, DA accuracy > 16 bits
3. Electrical isolation: > 1500VDC
4. Good stability: Linearity better than 0.05% (with sensors), temperature compensation accuracy better than 0.5%
5. Data backup and restore
6. Strong capability for anti-disturbance: Leading military-grade hardware and software anti-disturbance technology.
7. Excellent price-performance ratio: good performance with heading circuit board provides economical solutions.

  • PDF
  • specifications
There are no photos

Technical specification of the device:
Supply power:DC12-32V (DC 24V is suggested)
Matching sensor:standard diffused silicon, piezoresistive ceramic, single crystal silicon and level sensors
Sampling rate:>20times/s
Displaying and bits:LCD with backlight, displaying 5 bits, and 4 decimal places
Displaying interface:English or Chinese,displaying pressure, temperature/current/ percentage(interactive display) and 0-100% analog displaying
Displaying units:Various commen displaying units, including KPa、m4H2O、MPa、M、inH20、mmH2O、PSI、bar、mbar、Pa、%、mA
Output resolution:1uA
Temp. compensation accuracy:-30~70℃ complete machine accuracy is better than 0.5% (including accuracy of sensor
Linearity accuracy:Complete machine linearity is better than 0.2% (Multi-point calibrating is available as required)
Anti-disturbance:Power isolation, signal isolation (magnetic isolation)
Range ratio:10:01
Circuit protection Measurement:surge current protection, Reverse Power Protection
Circuit design:Intrinsic safety
Isolation range:>200MΩ
Communication Protocol:Private protocol
Adjusting method:by buttons on LCD head, program on pc or communicator
Dimensions:OD=61mm, Mounting hole pitch=55.14mm (suited for pressure and level transmitter in 3051 housing)
Motherboard buttons operation:reset, lower range calibration(zero drift under pressure source), upper range calibration (full scale calibration)
LCD head buttons operation:changing span units, decimal place, output features, changing damping time, currant fixing, write-protection,factory reset and zero clearing

There are no video