Adleer Group

Adleer Group

ADTC-7043SM Thermal Security Monitoring Systems

Latest News »
Relay Protection Tester ADRP-1400 Relay Protection Tester ADRP-1200A Primary Current Injection Test ADPA-5000A digital ultrasonic detector  ADUD-501-502-503-504

General information about ADTC-7043SM Thermal Security Monitoring Systems:
ADTC-7043SM The series of high-performance, multi-sensor pan/tilt cameras bring dual-channel with thermal and visible-light imaging together. Their precision pan/tilt mechanism gives you accurate pointing control while providing sharp image and video for critical facilities.
Main Features:
1-Dual-channel: thermal and visible-light camera
2-Multi-lens for option
3-Multiple lenses for option
4-Support Onvif protocol
5-Support Pelco-D protocol
6-IP67 encapsulation, protection shield for all-weather conditions

  • PDF
  • specifications
There are no photos

Technical specification of the device:
Thermal Imaging Camera
Detector type:FPA, uncooled detector
Detector material:aSi
IR resolution:384×288
Pixel pitch:17um
Spectral range:8~14um
Detector frequency:50Hz
Video output:PAL/NTSC
Thermal sensitivity (NETD):60mk
Lens type:Motor
Time to image:<3s
Polarity/LUT:White hot, black hot
CCD Video Camera
Minimum illumination:0.1Lux@(F1.2, AGC ON, IRC ON), B/W: 0.002Lux@(F1.2, AGC ON, IRC OFF)
Electronic shutter:1/25~1/10000
Day-and-night switch:With moving filtering
White balance:Auto
Digital noise reduction:3D/2D
Image gain:Auto/Manual/Night
Blacklight compensation:Auto
Auto aperture:DC drive
Lens interface type:C/CS interface
Zoom focus lens:F=7.75mm(F1.6)~310mm(F5.6)40X
Horizontal angle:0~360° continuous rotation
Vertical angle:-90~+90°
Horizontal speed:0.1 ~80°/s
Vertical speed:0.1 ~60°/s
Control protocol:Pelco-D
Communication baud rate:2400/4800/9600/19200 bps
Communication mode:RS485
Network interface:RJ-45, 10/100Base-T
Power System
External power:AC24V±20%
Power consumption:≤100W
Environmental Data
Operating temperature range:-25 ℃~+55 ℃
Physical Data

There are no video