Adleer Group

Adleer Group

ADOF-114FS fusion splicer

Latest News »
ADBC-107C Battery Charger push pipe-sewer camera AD-V2006RC push pipe/sewer drain camera AD-P2005RC VLF ADVLF-30

General information about ADOF-114FS fusion splicer:
Handheld, Small, Light
Industrial standard screen
Various colors are available
Core to core digital alignment
8s splicing stime, 26s tube heating time
5800mAh and pluggable Li-battery, Typical 200 cycles
ARC calibrated by temperature and air pressure automatically

  • PDF
  • specifications
There are no photos

Technical specification of the device:
Fiber count:Single
Applicable fiber dimensions:Cladding diameter: 80 -150μm, Coating diameter: 160 ? 900μm
Typical splice loss:0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Return loss:>60db
Fiber cleaved length:10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm )
Splicing program:40 groups
Operate mode:Manual, Automatic
Typical splicing time:8 seconds
Tube heating time:26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification:250X(X or Y view), 125X(X and Y view)
Viewing method and display:2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result:4000 results
Loss evaluation:Available
Tension test:1.8-2.2N
Interface:GUI menu interface, easier operation
Battery capacity:5800mAh, typical 180 cycles(splice and tube heat), pluggable inner Li-battery
Power supply:Adaptor, input: AC100-240V(50/60HZ)
Electrode life:More than 4000 ARC discharges, can be replaced conveniently
Terminals:USB 2.0 port, for uploading splice results and upgrading software
Operating condition:Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: max 15m/s
Weight:1.9kg including battery

There are no video